Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Dehum (Dehumidifier)
Fan
Temperature (air conditioner mode only)
•
Press the + / - buttons as many times as necessary to adjust the temperature indicated
on the screen (from 16°C to 31°C). The set target temperature will be displayed for 5
seconds, then when the air conditioner is in operation, the current room temperature
will be displayed.
•
If the room temperature is lower than the set temperature, the air conditioning function
will stop, but the fan will continue to run.
•
The unit turns the air conditioning function on and off to maintain the set temperature.
Speed (air conditioning/fan mode only)
•
Press the
button to select the low or high speed (the corresponding indicator will
light up).
Timer (all modes)
You can set the timer to turn the unit on or off after a period between 1 and 24 hours.
•
To set the unit's switch-off time, make sure that the power is on. Press the
enter the timer function. The timer indicator will light up and the hour will flash. Then
press the + / - buttons to set the number of hours after which you would like the unit to
turn off. Press the
off and stops flashing) to confirm and start the timer.
NOTE: Whenever the timer is set, the remaining time will be displayed on the
screen.
•
To set the unit to turn on at a certain time, make sure that it is turned off. Press the
button to enter the timer function. The timer indicator will light up and the hour will
flash. Then press the + / - buttons to set the number of hours after which you would like
the unit to turn on. Press the
mode turns off and stops flashing) to confirm and start the timer.
NOTE: When the timer has been set to turn on the unit at a certain time, the
number of hours remaining will be displayed on the screen.
•
To cancel the timer, press the
• Removes moisture from the air.
• The fan speed is set to a low speed. Timer mode can be
selected but the speed and temperature will be disabled in
this mode.
IMPORTANT: When the W.F indicator lights up, you must
empty the unit's water tank; refer to the Manually draining
the unit section to find out how to drain the unit.
• Circulates the air without cooling it.
• Only the speed and timer functions can be selected in this
mode.
NOTE: No drain hose is required.
button (when the hour is flashing and before the setting mode turns
button (when the hour is flashing and before the setting
button until the timer indicator turns off.
26
EN
button to
Publicidad
