Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Airflow direction
To change the vertical airflow direction (up or down), simply push the vent flaps up or down.
To change the horizontal airflow direction (left or right), pull the lever that moves the inner
flaps left or right.
Overload protection
Should the unit turn off due to a power cut or overheating, you must wait 3 minutes before
restarting it. If the plug is removed, all programmed timer settings will be lost and the unit
will start in default mode.
The overload protection can trip in the following situations:
Mode
Air conditioner
Dehumidification
Fan
NOTE: If any windows or doors are left open whilst the unit is in the air conditioning
or dehumidifying mode and the relative humidity is above 80%, condensation may
drip from the cold air outlet.
Remote control
The remote control buttons work just like the control panel ones. However, some of the icons
are different, as indicated below:
Remote control
/
Point the remote control at the receiver on the front of the unit. Make sure that the remote
control is used within 5 metres of the unit (with no obstacles in between). If the remote control
is not working, move it closer to the unit or change the battery.
NOTE: Other infrared sensors can interfere with the remote control's performance.
Move such devices away from the remote control.
Environment
The ambient temperature is above 43°C
The ambient temperature is below 15°C
The ambient temperature is below 15°C
The ambient temperature is above 31°C
Control panel
+ / -
27
Function
Selects the mode
Increases or decreases the
temperature or time
EN
Publicidad
