allen+roth LP8130LBN Manual De Instrucciones página 11

FINAL ASSEMBLY INSTRUCTIONS
1. Remove one of the four preassemble screws
inside the motor assembly (A). Slightly loose
the remaining three screws. Assemble the
housing assembly (G) to the motor assembly
(A) using the three key slots in the housing
assembly (G). Replace the fourth screw and
securely tighten all four screws.
2. Position the blade (L) over the blade holder
arm (K) with threaded posts showing. Make
sure the bottom edge of the blade (L) is fully
seated against the blade holder arm (K).
Tighten washer-head screws (BB) with fiber
washers (CC) to secure the blade (L) to the
blade holder arm (I).
Hardware Used
Washer-Head
BB
Screw
Fiber
CC
Washer
3. Attach blade holder arms (K) to the hub of
motor assembly (A) using screws (AA).
NOTE: Periodically check blade holder hardware
and resecure if necessary.
WARNING
To reduce the risk of personal injury, do not
bend the blade holders when installing,
balancing the blades or cleaning the fan. Do not
insert foreign objects in between the rotating
blades.
Hardware Used
AA Screw
x 12
x 12
x 8
1
2
K
3
AA
11
A
CC
BB
K
Lowes.com/allenandroth
G
L