Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
• When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish.
• Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
WARNING
• Do not use water when cleaning the ceiling fan. It could damage the motor or the finish and
create the possibility of electrical shock.
RECOMMENDED: Periodically check that the fan motor unit screws, blade screws, support
housing and light kit screws are tight and secure.
• Periodic light dusting of the blades is recommended. A feather duster will work best.
• Avoid using water, cleansers, or harsh rags, which can warp and ruin the finish.
• Bulb Replacement: Use 18-watt GU24 base bulbs.
• Re-lamp with the appropriate wattage bulb. Do not exceed the wattage indicated on the bulb
socket.
• Do not install or use fan if any part is damaged or missing.
TROUBLESHOOTING
PROBLEM
Fan will not start.
Fan sounds noisy.
POSSIBLE CAUSE
1. Fuse or circuit breaker blown.
2. Loose power line connections to the
fan, or loose 9 pin connector inside
light kit.
3. Reversing switch in neutral position.
1. Blades not attached to fan.
2. Loose screws in motor housing.
3. Screws securing fan blade holders to
motor hub are loose.
4. Wire connectors inside housing are
rattling.
CORRECTIVE ACTION
1. Check main and branch circuit
fuses or circuit breakers.
2. Check line wire connections to
fan and 9 pin connection inside
light kit.
3. Make sure reversing switch
position is all the way to one
side.
Make sure main power is turned
off!
1. Attach blades to fan before
operating.
2. Check to make sure all screws
in motor housing are snug
(do not overtighten).
3. Check to make sure the screws
that attach the fan blade
holders to the motor hub are tight.
4. Check to make sure wire
connectors in switch housing
are not rattling against each
other or against the interior wall
of the switch housing.
17
WARNING
Lowes.com/allenandroth
Publicidad
