Publicidad
Idiomas disponibles
Idiomas disponibles
Push the new lamp without slanting
into the fitting. Do not touch the
lamp with your fingers, use a tissue.
Fingerprints on the lamp should be
removed with a lint-free cloth and
denatured alcohol.
Re-attach the safety attachment (6)
with help of the markings and turn
the attachment anti-clockwise (fig.
N, O).
Important notes
Only use the light with parts desig-
ned for it. Use only rechargeables,
not regular (primary) batteries.
Make sure that
- the light is at least 0.5 m in beam
direction away from flammable
substances,
- both water and flammable sub-
stances and liquids are kept away
from the light,
- after lengthy operation the light
cools down before you touch the
light head or stow it away.
Avoid deep discharging of the batte-
ries.
The light must only be serviced by
qualified persons.
Right reserved to make technical modifications.
Maintenance and care
The light is maintenance-free. Make
sure that the safety screen (7) is free
of stains and dirt. If necessary remo-
ve these before start-up. Only clean
the light casing with a soft dry cloth.
On no account use petrol or other
cleaning agents and solvents.
Please remove the batteries, if the
light will not be used for a lengthy
period.
Specifications
Operating voltage: 6 V
Halogen lamp: 20 W, 3200 K
Illumination (at 3.16 m): approx. 50 lx
Required batteries: 5 x AA NiMH
rechargeable
Operating time (continuous
operation): up to 40 minutes
Dimensions (WxHxD): 55 x 98 x
72 mm (2.2 x 3.9 x 2.8 in.)
Weight (without batteries): 110 g
(3.9 oz.)
Accessories
3027 Replacement lamp 6 V, 20 W,
3200 K
9
Publicidad
