Publicidad
Idiomas disponibles
Idiomas disponibles
• Final bonding strength is reached after a very short time
(approx. 2 minutes). Spot gluing is recommended on
long items with large surfaces.
• At the 130 °C temperature setting and using "low melt"
glue sticks, you can also glue rigid foam (e.g. polysty-
rene). It is important to remember to apply the hot-melt
adhesive on the base surface and not, for example, on
the polystyrene.
• When gluing textiles or similar materials, it is recom-
mended to apply the hot-melt adhesive in "wavy" lines.
• Let the tool cool down after use.
• If necessary, use weatherproof and moisture-resistant
PUR glue sticks on the 130 °C temperature setting.
Note:
When changing from a glue stick applied at 130 °C to one
applied at 200 °C, the glue may initially be much more fluid
as it leaves nozzle.
5. Maintenance and care
The tool requires no maintenance.
The tool complies with the relevant safety regulations.
Repairs must only be carried out by a qualified electrician.
Otherwise the user may run the risk of accidents.
Maintenance by users. Requirements on users:
– Familiarity with these instructions.
Special requirements apply to the following users:
– Children aged 8 and over.
– People with reduced physical, sensory or mental
abilities.
– People with a lack of experience and knowledge.
– 26 –
Contents
Publicidad
