Publicidad
Idiomas disponibles
Idiomas disponibles
en | 6 | SCT 418
3.7
Alignment unit
The alignment unit, together with the spirit levels
mounted on the measuring bar, enables precise align‐
ment to the vehicle. 4 values can be set on the align‐
ment unit:
1)
(A)
• Lateral offset
1)
(B)
• Yaw angle
(C)
• Roll angle
(D)
• Pitch angle
---
1)
For actual values see the "Bosch ADAS Positioning" software
---
3.8
Mount for large calibration boards
(optional)
Large calibration boards can be secured at the top with
the aid of the mount for large calibration boards. As a
result, large calibration boards remain fixed and do not
tilt forward, thus preventing a change of the pitch an‐
gle.
Calibration board without retaining plate
Retaining brackets are mounted on the indicator bar,
into which retaining adapters X can be hooked. The
large calibration board is placed on the 2 retaining
adapters X and secured at the top by means of the cali‐
bration board retainer T on the mount for large calibra‐
tion boards.
1 689 989 518 | 2022-07-24
---
Calibration board with retaining plate
The large calibration board is hooked into the retaining
bolt of the mount for large calibration boards at the top
and secured at the bottom by means of 2 slides with
magnetic contact surfaces.
Robert Bosch GmbH
Publicidad
