Publicidad
Idiomas disponibles
Idiomas disponibles
TYPHOON 3
OPERATION GUIDE
FZVAAK-3
TROUBLESHOOTING
If your sprayer is not turning on or functioning as it should, visit
how to properly determine the cause of the issue.
To contact Technical Support, email
Problem
Sprayer does not turn on.
Leaks from tank.
Leaks from gun/nozzle.
Clogged pump / hose / gun /
wand / nozzle
support@wessol.com
Possible Cause(s)
Dead battery
Defective or damaged part
Loose hose connection
Loose hose connection
Missing or worn gasket
Not rinsing parts with water
after use.
fzspray.com/pages/troubleshoot
or call
+1 (803)
339-2500.
Charge the battery. If the battery will not charge, test the charger or
contact Support for a replacement if applicable.
Follow the instructions at fzspray.com/troubleshoot or contact Support
for guidance.
Remove the plastic cover plate and locate the hose
connection to the pump. Tighten the hose clamp.
Ensure the spray gun is fully tightened onto the threaded end of the
hose.
Locate the necessary part from page 19 and contact Support or visit
fzspray.com to purchase.
Take apart and thoroughly clean the parts. Rinse the sprayer with warm,
soapy water after each use.
- 17 -
for detailed instructions on
Solution
© WESSOL, LLC 2022
Publicidad
