Publicidad
Idiomas disponibles
Idiomas disponibles
Before installing this accessory, please first set up the Google
Nest Cam (battery) using the in-box cable provided with the
camera. This will ensure that you have the latest firmware.
In the Box
1 x solar panel and 360° mounting bracket
3 x screws for wall mount
3 x wall anchors for wall mount
1 x user manual
wall anchors for
screws for
wall mount
wall mount
Installation
You can mount the solar panel up to 13.1 ft / 4 m (max cable length) away from
your camera. For optimal performance, install your solar panel at a location where it
will receive a few hours of direct sunlight daily.
Mounting the Solar Panel
You can mount the solar panel directly onto a wooden surface using the included
screws. If you are mounting it onto a brick, concrete, or stucco, mark the holes first
using the bracket, drill a hole for the anchors. You can then insert the anchors and
subsequently use the screws to secure the mount. The drill bit size is 1/8 inches
(3.17mm).
Slide the solar panel onto the mount until it clicks.
solar panel and
360° mounting bracket
Note:
The 360-degree rotatable mount allows you to adjust the solar panel in the best
position to absorb sunlight.
Page 2
Page 3
Publicidad
