VONROC OT501DC Traducción Del Manual Original página 6

EN
e) Do not use a battery pack or tool that is
damaged or modifi ed. Damaged or modifi ed
batteries may exhibit unpredictable behaviour
resulting in fi re, explosion or risk of injury.
f) Do not expose a battery pack or tool to fi re
or excessive temperature. Exposure to fi re or
temperature above 130 °C may cause explosion.
NOTE The temperature „130 °C" can be replaced
by the temperature „265 °F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specifi ed in the instructions.
Charging improperly or at temperatures outside
the specifi ed range may damage the battery and
increase the risk of fi re.
6) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
ADDITIONAL SAFETY WARNINGS FOR
MULTITOOLS
Contact with or inhalation of dust coming
free during use (e.g. lead-painted surfaces,
wood and metal) can endanger your health
and the health of bystanders. Always wear
appropriate protective equipment, such as
a dust mask. Always use proper dust
extraction during use.
• Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
• Do not work metal with a magnesium content of
more than 80%.
• Be very careful when working painted surfaces.
• Do not use accessories which are not specif-
ically designed and recommended by the manu-
facturer. Risk of personal injury.
• Inspect the machine and the accessories before
each use. Do not use accessories which are
bent, cracked, or otherwise damaged. If the
machine or one of the accessories is dropped,
inspect the machine or the accessory for dam-
age. If necessary, replace the accessory.
• Only use accessories that are recommended by
the manufacturer.
6
• Only use accessories that are suitable for the
application.
• Only use accessories with the correct dimen-
sions.
• Do not use accessories that require liquid cool-
ants. Risk of electric shock.
• Make sure that the accessories are properly
mounted. Do not use adapters or other aids to
mount accessories with another spindle diameter.
• Make sure that the maximum speed for the
accessory is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
• Let the machine run at no load in a safe area
after mounting the accessories. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
• Make sure that the workpiece is properly sup-
ported or fi xed.
• Wear safety goggles. Wear hearing protection.
Wear a dust mask. If necessary, use other
protective means, such as safety gloves, safety
shoes, etc. Risk of personal injury.
• Keep bystanders away from the work area.
Make sure that all persons in the work area
wear protective equipment. Risk of personal
injury.
• Keep the mains cable away from the rotating
accessory. If the mains cable touches the rotat-
ing accessory, your hands or arms may come
in contact with the accessory. Risk of personal
injury.
• Hold the machine by the insulated gripping
surfaces where the accessory may contact hid-
den wiring or the mains cable. If the accessory
contacts a 'live' wire, the exposed metal parts
of the machine can also become 'live'. Risk of
electric shock.
• Do not use the machine while carrying it at your
side. Risk of personal injury.
• Do not use the machine near fl ammable materi-
als. Risk of fi re.
• Beware that the accessory continues to rotate
for a short period after switching off the ma-
chine. Do not attempt to bring the accessory to
a standstill yourself.
• Never put the machine down on a table or a
workbench before it has been switched off.
• Regularly clean the ventilation slots. Risk of
electric shock.
WWW.VONROC.COM