Menu - PRESIDENT RONALD Manual Del Usuario

11) UP/DN KNOBS ON THE MICROPHONE
Use UP/DN keys (11) to select the frequency. UP to increase frequency and
DN to decrease frequency.
See PUSH ROTARY page 8.
A) DC-POWER TERMINAL (13,8 V)
B) ANTENNA CONNECTOR (SO-239)
C) JACK FOR EXTERNAL OPTIONAL SPEAKER (8 Ω, Ø 3,5 mm)
D) JACK FOR PA OPTIONAL SPEAKER (Public Address) (8 Ω,
Ø 3.5 mm)
C) MENU
The order of 16 functions is as described in this manual. However, the function
displayed by entering the

MENU

Whatever the function the procedure is the same:
Press F (7) for 2 seconds to enter
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function to be set.
2. Press PUSH knob (5) to select
The parameter blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) knob to
the value of the parameter.
4. New press PUSH knob (5) permits to
stops blinking and if the function has more than one parameter, the next
parameter blinks.
Note: UP/DN keys (11) on the microphone have the same effect as the rota-
tion of PUSH knob (5). Transmission PTT switch (10)
and exists MENU. disappears from LCD.
1) BACKLIGHT COLOR
Press for 2 seconds F (7) key to
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). The current color blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn the PUSH knob (5) to
the desired color. Seven colors are possible and long-repeated:
4. New press PUSH knob (5) permits to
blinking. a) Return to point 1 to
switch (10) to validate and exit
5. If no key is pressed, the unit exits
press on F (7) key.
Default color is (red).
2) KEY BEEP
Press for 2 seconds F (7) key to
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). The current parameter blinks on LCD.
22
will be the last function modified by user.
or exit MENU. is displayed.
the setting parameter of the chosen function.
validate the chosen value. The parameter
validates
the last setting
access to MENU. is displayed.
validate the chosen color. The color stops
select another function to set or b) Press PTT
MENU.
after 10 seconds or by a new long
MENU
access
to MENU. is displayed.
select
the
modify
select
select
select