PRESIDENT RONALD Manual Del Usuario página 25

3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
type on the microphone EL (électret) or DY (dynamic).
4. New press PUSH knob (5) permits to
blinking on LCD. a) Return to point 1 to
Press PTT switch (10) to validate
5. If no key is pressed, the unit exits
press on F (7) key.
Default type of microphone is EL (electret).
12) MIC GAIN
Press for 2 seconds F (7) key to access
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). The bargraph (under the frequencies) blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to increase/
decrease the Gain level on the microphone (10 levels from 1 to 10).
4. New press PUSH knob (5) permits to
on LCD. a) Return to point 1 to
validate exit
switch (10) to and
5. If no key is pressed, the unit exits
press on F (7) key.
The Mic Gain value is displayed on the bargraph every time you press on PTT
switch (10) to emit.
Default Mic Gain is level 5.
13) RF GAIN
Press for 2 seconds F (7) key to access to MENU.
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). The bargraph (under the frequencies) blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to increase/
decrease the RF Gain level (10 levels from 1 to 10).
4. New press PUSH knob (5) permits to
on LCD. a) Return to point 1 to
validate exit
switch (10) to and
5. If no key is pressed, the unit exits
press on F (7) key.
The RF Gain value is permanently displayed on the bargraph.
The RF GAIN permits to adjust the reception sensibility.
Default RF Gain is the level 10.
validate the choice. The setting stops
select another function to set or b)
exit
and MENU.
MENU after 10 seconds or by a new long
to MENU. is displayed.
validate
the level. The level stops blinking
select another function to set or b) Press PTT
MENU.
MENU after 10 seconds or by a new long
is displayed.
validate
the level. The level stops blinking
select another function to set or b) Press PTT
MENU.
MENU after 10 seconds or by a new long
14) BAND NAME
select the
1. Press for 2 seconds BAND key (7) key to
2. Press F key (7) for 2 seconds to
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
4. Press PUSH knob (5). The first digit blinks on LCD.
5. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
character of the first digit.
6. Press PUSH knob (5) to
7. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
character of the second digit.
select
the
8. New press PUSH knob (5) permits to
band selected in point 1. The parameter stops blinking. a) Return to point 1
to select another band to be modified. b) Press PTT switch (10) to
and exit
MENU.
9. If no key is pressed, the unit exits
press on F (7) key.
Permits to rename the bands (with two digits).
Default name of the bands is:
See menu RESET BAND function page 26.
15) PA SETTING
Press for 2 seconds F (7) key to
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). PA blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
select
the
or I n setting.
4. New press PUSH knob (5) permits to
blinking. a) Return to point 1 to select another function to set or b) Press PTT
switch (10) to validate
5. If no key is pressed, the unit exits
press on F (7) key.
modulation of the microphone
PA: the
ted to the Public Address loudspeaker connected to jack PA.SP. (D).
modulation of the microphone
I n: the
connected to jack PA.SP. (D). The
loudspeaker [or external optional loudspeaker connected to jack EXT.SP (C)]
The VOL knob (1) permits to
See § RADIO/PA page 26.
25
select
the band to be modified.
access to MENU. is displayed.
validate the first digit. The second digit blinks on LCD.
validate the new name assigned to the
MENU after 10 seconds or by a new long
access to MENU. is displayed.
validate
the choice. The parameter stops
and exit MENU.
MENU after 10 seconds or by a new long
received signals
and the
is transmitted to external loudspeaker
received signal is transmitted to the internal
adjust the audio level of the mode PA.
select the
choose the
choose the
validate
.
select the
choose
PA
are transmit-