Publicidad
Idiomas disponibles
Idiomas disponibles
10
INSTALLATION
10.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
•
If parts of the machine are damaged, do not use
the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
10.2 INSTALL THE TRIGGER HANDLE
7
1. Slide trigger handle (7) on the connecting tube (8).
2. Move trigger handle to desired location before fully
tightening. Use supplied knob (9) to tighten trigger
handle to the connecting tube.
3. Place the cord (10) in the cord retainer (11).
English
11
10
8
9
10.3 INSTALL THE BLOWER TUBE
c
12
13
1. Align either of the grooves (a) in tube (12) with
the tabs (b) on tube (8). Turn the tube (12) in the
direction of the arrow until both of the tabs slide into
the lock positions (c).
2. Connect the tube (13) to tube (12). For shorter
tube application, turn rear tube counterclockwise
and move tube to upper position (d).
7
8
b
a
12
d
EN
Publicidad
