Replacing The Light Bulb; Cleaning And Maintenance - Dometic WAECO CF 80 Instrucciones De Uso

CoolFreeze
6.10

Replacing the light bulb

➤ Press the switch pin (fig. 8 2, page 5) downwards so that the
transparent part (fig. 8 1, page 5) of the lamp can be removed
at the front.
➤ Replace the light bulb.
I
NOTE
The LEDs in the light bulb must be aligned with the transparent
part of the lamp.
➤ Press the transparent part of the lamp back into the housing.
7

Cleaning and maintenance

!
WARNING!
Always disconnect the device from the mains before you clean
and service it.
A
NOTICE! Risk of damage
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp
cloth.
➤ Make sure that the air inlet and outlet vents on the device are
free of any dust and dirt, so that heat can be released and the
device is not damaged.
EN
Cleaning and maintenance
37