Style selections SGY-GAR2 Manual De Instrucciones página 7

INSTALLATION
Attach the Water Hose
1. Verify that hose guide is lined up with water
system outlet. If necessary, rotate the crank
handle until the hose guide is aligned with the
water system or unlock hose guide by lifting
latch on top of guide and align with water
system outlet. Re-lock hose guide for use.
2. Verify that there is a rubber washer installed
on the inside of each female fitting on the
garden hose. Uncoil garden hose (not included)
and insert one end of the garden hose through
hose guide. Screw the female end onto the
outlet tube and had tighten. On the other end
of the hose attach the nozzle. Turn on water
supply and check for leaks.
It maybe necessary to use a pair of
NOTE
pliers to tighten down the fitting.
3. To unwind your hose, pull the hose out away
from your hose reel in a straight line. To rewind
the hose, walk the end back to the hose reel so
the hose is in a "U" shape in front of the reel.
This assists in easier rewinding of the hose.
1
2
3
7
UNLOCK
LOCK