Publicidad
Idiomas disponibles
Idiomas disponibles
4. Move the mobile head from the application surface of treated area.
5. Move the device to the next area and start flashing. You must administer the pluses in
a row, from one end to the other, and by proceeding methodically through successive
rows. The mark that the application pressure leaves on your skin should help you
to align the device correctly before triggering a new flash. This method helps you to
better cover the area in question while preventing you to overlap the flashes or to issue
them too close to each other on the same area, or on the other hand, to leave too much
space in between the areas.
Do not treat the same area more than once per session, otherwise the risk of side
effects will increase (see § 4.2 "Side Effects with
Please note: If the
will automatically turn off, you will once again need to hold down the "on/off" button, located
at rear of the device, for about 2 seconds". Also, when the power is turned on, if you hold
down the "on/off" button for too long (about 6 seconds), the
off again.
7.3
What should we expect with the hair removal device
Here are normal things that you will see or hear during a session:
• Fan noise
The cooling fan of the hair removal device
of a hair dryer, this is normal.
• Soft sound at each time it issues a flash
Upon activation of a new flash of the hair removal device
accompany the luminous flash.
• Moderate pressure from the replaceable mobile head
This is necessary and useful to correctly position the device on the area to be treated;
this is exclusive to the safety device of hair removal device
device stays idle for a prolonged period when in used, it
»).
Flash will turn
, makes a noise resembling that
, a soft sound will
.
?
61
Publicidad
