Foppapedretti Divo Manual De Instrucciones página 202

ISOFIX
CLASS D
Make sure that your vehicle has ISOFIX anchor points and is approved in the
vehicle application list which is supplied with the base.
Locate the vehicle ISOFIX points. if any problem please consult the vehicle
manual. They are usually between the vehicle seat base and back.
PICTURE 1
Step 1. Lift up the "anti-rebound bar" to a vertical position until you hear a
"CLICK" sound, indicating that it is correctly positioned.
Step 2. Fold the "support leg" downwards until it stops.
Step 3. Insert the two red plastic guides for the ISOFIX connectors and attach
them to the ISOFIX points in the vehicle. The plastic guides help to identify the
ISOFIX points on the vehicle, making installation easier. They also protect the
vehicle passenger seats.
PICTURE 2
Step 4-5. Pull the yellow button located on the Isofix base upwards to extend the
connectors outwards as far as possible.
PICTURE 3
Step 6. Position the Isofix base on the car seat, making sure that the Isofix
connectors are perfectly aligned with the guides that you have just attached.Insert
the two ISOFIX connectors into the red-coloured guides, and push to attach the
two connectors to the ISOFIX hooks in the vehicle. You will hear a click once they
have attached. Check that the indicators are green on both sides.
• ENGLISH •
INSTALLING THE ISOFIX BASE
30
Installed on passenger seats
fitted with Isofix anchoring points
(positioned between the seat and
the backrest of the passenger
seat) and which have sufficient
space for the support leg.
Isofix label
Front airbag
Side airbag
YES
green
NO
YES