Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
The milk contains large bubbles and
squirts out of the milk spout (D5) or
there is little froth
The cup warmer is hot, even though it
has been disabled
The machine emits noises or small
puffs of steam while not in use
POSSIBLE CAUSE
The milk is not cold enough or is not
semi-skimmed or skimmed.
The froth adjustment dial (D1) is incor-
rectly adjusted.
The milk container lid (D2) or froth ad-
justment dial (D1) is dirty
The hot water/steam connection noz-
zle (A9) is dirty
A number of beverages have been pre-
pared in rapid succession
The machine is ready for use, or has re-
cently been turned off, and condensate
is dripping into the hot vaporiser
31
REMEDY
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 41°F/5° C). If the
result is not as you wished, try changing brand
of milk.
Adjust following the instructions in section "9.
Making cappuccinos and milk-based coffees".
Clean the milk container lid and froth adjust-
ment dial as described in section "14.10 Clean-
ing the milk container".
Clean the connection nozzle as described in
section "14.11 Cleaning the hot water/steam
connection nozzle".
This is normal, as it is passively heated by the
internal heat of the machine.
This is part of normal operation. To limit the
phenomenon, empty the drip tray.
Publicidad
