Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance schedule
General
Clean the battery and the terminals.
Do a check of the battery level. Charge the battery
if it is necessary.
Examine all belts and pulleys for wear and damage.
Replace worn or damaged parts.
Clean the engine and the transmission.
Examine all wires for damage.
Lubricate the product. Refer to the lubrication over-
view.
Make sure that all fasteners are tightened correctly.
Make sure that the tire pressure is correct in all
tires.
Engine
Examine the fuel hose for wear and damage. Re-
place the fuel hose if it is necessary.
Replace the fuel filter.
Clean the air filter.
Replace the air filter.
Examine the muffler and the heat deflector.
Do a check of the engine oil level. Fill with engine
oil if it is necessary.
Replace the engine oil.
Replace the engine oil filter.
Replace the spark plug.
Do a check of the engine speed. Adjust the engine
speed if it is necessary.
Transmission, con-
Examine the transmission cooling fan.
trols and drive sys-
Remove the wheels and lubricate the axles.
tem
Make sure that the product does not move when
the pedals are in the neutral position.
Do a check of the forward and rearward drive at
different speeds.
Do a check of the switch for the blade engagement
control.
Do a check of the switch for the cutting height lever.
Do a check of the switches for the forward pedal
and rearward pedal.
Do a check of the parking brake.
Do a check of the operator presence control (OPC).
22
Before each use/
Every 50 h or an-
weekly
nually
X
X
X
X
X
X
X
X
1903 - 002 - 06.02.2023
O
X
O
X
O
X
O
X
O
X
X
X
X
X
X
O
X
O
X
O
X
X
X
Publicidad
