Publicidad
Idiomas disponibles
Idiomas disponibles
EN
F47
30
F48
0
F49
0
PAR.
DEFAULT
i0
2
i1
0
i2
5
i5
0
i6
0
i7
5
PAR.
DEFAULT
u1
1
Condenser fan switch-off delay from when the compressor is
0
240
s
switched off (only if the condenser probe is not present)
Condenser fan status during defrosting
0
1
- - - -
0
1
Fan operating mode during conservation
0
1
- - - -
0 = in parallel with the compressor
1 = always on
MIN.
MAX.
U.M.
DIGITAL INPUTS
Effect of the door opening, or when the door switch input is
activated
0 = no effect and no signal
1 = the compressor, evaporator fan, thawing heaters, heater
0
2
- - - -
2 = the evaporator fan is switched off and the cabinet light is
Door switch input polarity
0
1
- - - -
0
1
Door open duration for recording open door alarm and
deactivating all outputs except light and alarm;
-1
120
min
-1 =
Function linked to multi-purpose digital input:
0 = high pressure switch
0
2
- - - -
1 = low pressure switch
2 = compressor thermal switch
Multi-purpose input polarity
0
1
- - - -
0
1
Multi-purpose alarm signalling delay
-1
240
s
-1 = alarm not signalled
MIN.
MAX.
U.M.
DIGITAL OUTPUTS
Load managed by output K4
0=door frame heater
0
2
- - - -
1=condenser fan
2=thawing heater
= off
= on
and humidifier are switched off and the cabinet light is
on, once the time set by parameter i2 has elapsed, the
device displays the alarm and the buzzer is activated
until the door is closed. See also parameter F15
on, once the time set by parameter i2 has elapsed, the
device displays the alarm and the buzzer is activated
until the door is closed. See also parameter F15
=
normally open (input active with contact closed)
=
normally closed (input active with contact open)
alarm not signalled
=
normally open (input active with contact closed)
=
normally closed (input active with contact open)
27
Publicidad
