cecotec ENERGYSILENCE 2000 COOL TOWER SMART Manual De Instrucciones página 41

Speed button
Press this button to choose from high, medium or low speed. The speed by default is medium.
Mode button
Press this button to choose from normal airflow, natural airflow and night mode. The airflow
by default is normal.
Oscillation button
- Press this button to choose the air direction.
- Press it again to cancel.
- Direct the blades transversely with your hands, choosing the direction of the air upwards
or downwards.
Timer button
Press this button to set the desired operating time from 0 to 8 hours. Every time you press the
button, the time will add.
Cool mode button
Press this button to activate the cool mode. If you add the coolers to the water tank, the air
will come out cooler. If you press the button again, you will cancel the function. Make sure the
water level is between the 'Min' and 'Max' marks.
Battery
The remote control requires a button cell (CR2025, 3V).
5. CLEANING AND MAINTENANCE
- Use a soft, damp cloth to clean the device surface. Do not use abrasive or corrosive
products.
- Do not immerse any part of the air cooler in water or other liquids.
- After cleaning, carefully dry the appliance and make sure that all the electrical parts are
completely dry.
- Make sure the air inlet and outlet are clean and protected from dust and dirt.
- If the product is not going to be used for a long period, unplug it and store it in a dry and
safe place.
- You should clean the device once every week. Dry the water tank completely and refill it
with fresh water. This will reduce the amount of mineral deposits and help extend the life
of the appliance. Clean and store the device in a safe, dry place if it is not going to be used
for a long period of time.
E N E R GYS I L E N C E 2000 COOL TOWER SMART
ENGLISH
41