Blackstone 1968 Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Set the griddle on its feet� ensure that the ignition needles
STEP 02
are positioned 3-7mm above the burner tube�
Use two (2) M6 bolts to attach the handle and grommets to
STEP 04
the hood�
06
3-7mm 3-7mm
Place the griddle top onto the griddle body by aligning the
STEP 03
four pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place�
Place the two front pins into the Hang the grease cup in the slot on the back of the
STEP 05
griddle body� front locking holes and push the
griddle top and hood back� Then,
set the two rear pins into the
rear holes�
Model: 1968
BLACKSTONEPRODUCTS.COM/SUPPORT
Make s
seated
the gri
the gri
Make s
seated
the gri
griddle
Place
front lo
griddle
set the
rear ho