Model: 1968
Heavy pieces. Two people should assemble this appliance.
Proceed to USING YOUR BLACKSTONE�
STEP 06
Heavy pieces. Two people should assemble this appliance.
NOTICE
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
NOTICE
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
USING YOUR BLACKSTONE
CoNNeCT THe lPG CYlINdeR
1 LB (453 G)
Screw in the lPG cylinder into the gas regulator, turning the
STEP 01
cylinder clockwise�
The regulator may make a humming or whistling noise during operation. This
The regulator may make a humming or whistling noise during operation. This
will not affect safety or use of the appliance.
will not affect safety or use of the appliance.
BLACKSTONEPRODUCTS.COM/SUPPORT
CAUTIoN
CAUTIoN
NOTICE
USING YOUR BLACKSTONE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
NOTICE
DO NOT leave the hood closed for more than 10 minutes while
cooking.
NOTICE
DO NOT leave the hood closed for more than 10 minutes while
cooking.
REGULATOR SAFETY
Cross threading can occur if you force thread a connection
at an improper angle. This will damage the threads, lead to
propane leaking, and potentially result in a build-up of fuel
that can ignite.
DO NOT cross thread the connection between your LPG
cylinder and regulator or regulator and gas rail.
If you can not connect the regulator, DO NOT use the
regulator.
Regulator must be replaced with a Blackstone approved
model by a professionally licensed, authorized dealer.
Use this appliance, as purchased, only with gas and regulator/valve
assembly supplied�
If regulator fails in unit, it must be replaced with a Blackstone approved model
If regulator fails in unit, it must be replaced with a Blackstone approved model
(found on your Manufacturer label) by a professionally licensed, authorized
(found on your Manufacturer label) by a professionally licensed, authorized
dealer. Failure to comply will void the warranty.
dealer. Failure to comply will void the warranty.
| OWNER'S MANUAL
WARNING
WARNING
07