Publicidad
HOW TO INSTALL / OPERATE THE MACHINE
Before you start
CAUTION:
•
The streamer and accessories get very hot during use, always
allow them to cool down before handling.
•
Always unplug and switch of the steamer when assembling.
•
Always switch off the steamer before emptying the water tank
or changing the cloths/accessories.
IMPORTANT:
•
Please refer to the manual instruction recommendations
before use and test the steamer on a hidden are of flooring to
begin with.
•
Test for color fastness in a small hidden are of upholstery/
fabric to check for color removal before use.
•
When using the steamer, basic safety precautions should
always be observed.
•
The steamer is quipped with a thermostat and a thermal cut-
out. If for any reason the steamer overheats it will switch off. If
this happens turn off and unplug the steamer, allow to cool for
at least 2 to 4 hours an re-try.
Assembling your machine
1. Push the main body down into the floorhead until it clicks into place.
2. Stand the steamer upright by pushing the main body forward to lock
into position.
Publicidad
