turbionaire trend Serie Manual De Instrucciones página 13

TM
0 30
RESET
B. HUMIDITY MODE
The device is provided with a preset humidity detection circuit, only in AUTO mode, when the device will only work in exhaust mode only
when the relative humidity exceeds 40% to 100% (the factory default setting is 100%). The humidity level adjustment can be made directly
on the unit, recommended at the time of installation (according to the figure below, respecting the installation and use instructions of the
device). The humidity level is considered by the device by activating the AUTO mode from the remote control. For operation, see the
description of the remote control.
13