Vito Agro VIBSMAL1000 Manual De Instrucciones página 22

When using power tools, you should take into
account basic safety precautions to avoid the risk of
fire, electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your power tool.
Keep the instruction manual for future reference.
It is your responsibility to follow these preventive measures
in order to ensure your own safety. Always use the
multistage submersible
responsibly. In using the appliance, you accept full
responsibility for any accidents caused to third parties or
their goods during its use.
The water pump may only be used by people who have read
the instruction manual and are familiar with its handling.
Before operating the multistage submersible water pump
for the first time, users should be instructed by the seller or
any other qualified person on how to use it. Users must
ensure they are instructed adequately and practically.
The instruction manual is considered an integral part of the
water pump and must always be made available alongside
the appliance.
Familiarize yourself with the control devices and use of the
water pump. In particular, the user must know how to
quickly stop the appliance.
Do not run the water pump if you are not both physically
and mentally well. Do not operate it while you are tired or
under the influence of medication, drugs or alcohol. If you
have a health problem, ask your doctor if it is safe for you
to use the multistage submersible water pump before doing
so.
Never allow the water pump to be used by children,
individuals with limited physical, sensory or mental
abilities, individuals with lack of experience and knowledge
of the appliance, or others unfamiliar with the use
instructions.
Do not operate the pump in aquariums or tanks
where there are fish.
The pump may only be used as stated in this
instruction manual. Any other use, which may be
dangerous and may cause injury to the user or damage to
the pump, is not permitted.
water pump carefully
For safety reasons, any alteration to the pump other than
installing accessories specifically authorized by the
manufacturer, is prohibited. The warranty on your water
pump will be voided if you alter it in any way.
You may get information on authorized accessories from
your official VITO dealer.
The power cord of the water pump must be plugged
into a 230V 50Hz socket with differential protection.
The circuit breaker must be set to trip when there is a
maximum fault current of 30mA and to allow nominal
and
currents above 6A.
According to the VDE 0100 standard, the use of
pumps in swimming pools, ponds and garden
fountains is only permitted with the use of circuit breakers
integrated in the power supply circuit that supply the
pumps. If there are people in the pool or in the garden
pond, it is not allowed to use the pump.
Protect the sockets from moisture. If there is a risk of
flooding, install the sockets in a location that cannot be
reached by flooding or install properly protected sockets.
Protect the power cord, plug and socket from coming into
contact with heat, oil and sharp objects. If the power cord
is damaged, it must be replaced by a qualified technician.
It must not be repaired.
Ensure the pump is only used by individuals who have
familiarized themselves with the instruction manual.
Before running the water pump, replace any faulty, worn
out or damaged parts.
To ensure that you operate the pump safely, and before
start-up, make sure that:
▪ The water pump is assembled correctly;
▪ The safety devices are in perfect condition and function
properly. Never run the water pump if the safety devices
are missing, inhibited, damaged or worn out;