Samsung 3 Serie Manual Del Usuario página 30

Additional Settings
■
O
→ Sound → Additional Settings →
MENUm
DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal
•
(which is one of the signals received during a digital TV broadcast) to a desired level.
✎
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and
0dB.
✎
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
Digital Audio Out
•
Digital Audio Out is used to provide digital sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Audio Format (PCM/Dolby Digital): You can select the Digital Audio output format. The available Digital
Audio output format may differ depending on the input source.
✎
By connecting to 5.1ch speakers in a dolby digital setup, maximize your interactive 3D sound
experience.
Audio Delay: Correct audio-video mismatch, when watching TV or video, and listening to digital audio
output using an external device such as an AV receiver (0ms ~ 250ms).
Dolby Digital Comp (digital channels only): This function minimizes signal disparity between a dolby
•
digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
This function is available only when the Audio Format is set to Dolby Digital, Dolby Digital Plus,
AAC, or HE-AAC.
✎
Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.
Reset Sound
■
O
MENUm → Sound → Reset Sound →
Reset all sound settings to the factory defaults. Select Reset Sound, press ENTERE, select Yes on the pop-
up, and then press ENTERE
Setup
■
O
MENUm → System → Setup →
Configure the channels and the time when setting up the TV for the first time or when resetting the unit.
✎
Execute the initial setup following instructions that the TV guides.
✎
Enter your 4-digit PIN, the default of which is 0-0-0-0.
ENTERE
ENTERE
again.
Executing initial setup
ENTERE
English - 30