Descargar Imprimir esta página

AudioSonic CL-1563 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
Indication LEDs
A
B
I
H
POWER SUPPLY
The unit is designed for mains power supply AC 0V~0Hz.
Do not connect the unit to any other power supply to avoid damage that is not covered by your
warranty.
Disconnect from mains when not in use.
BACK-UP BATTERIES
Insert two batteries type "AAA, UM – ", 1. V. Please observe the correct polarity marked inside the
battery compartment ("+" and "-"). Preferably use alkaline batteries. In case of power failure the bat-
tery will keep the alarm and time settings without displaying them. In the event of a power failure the
radio and CD operation will stop. The life time of the batteries is about 1 month.
TIME SETTING
1. Connect the power plug to a wall socket.
2. On the display flashes 12:00 after connecting to the mains the first time.
3. Press and hold the button >>I / HOUR for fast setting or tap it briefly to increase the setting by
one hour.
4. Press and hold the button I<< / MINUTE for fast setting or tap it briefly to increase the setting by
one minute.
5. Press the CLOCK ADJ button once to confirm. The time indication stops flashing.
6. To adjust the 1 or  hours time format press and hold the CLOCK ADJ button for  seconds.
The display shows either 1H or H.
Note: If the clock was set before press the CLOCK ADJ button once. The adjusted time flashes on
the display; continue now with step .
HEADPHONES
On top of the device a . mm mini stereo plug PHONES is provided for private listening. Connect
here your headphones (not included) with a . mm mini stereo plug. When connecting the head-
phones the speakers are automatically muted.
GENERAL OPERATING INSTRUCTIONS
RADIO
1. Press the ON/OFF button to turn on the device.
. Select the desired radio frequency band AM or FM with the function selector BUZZER/AM/FM/
CD.
. Select the desired station with the TUNING rotary knob. The adjusted frequency for the corre-
sponding frequency band will be shown on the TUNING rotary knob.
. Adjust the volume with the VOLUME control.
LED indications:
A. ALARM 1: Alarm 1 activated
C
B. POWER: Turned on
C. RANDOM: Random playback activated
D. PM: 1 hours time format activated
E. SNOOZE: Snooze activated
F.
G. PROGRAM: Program function activated
H. SLEEP: Sleep function activated
I.
G
F
E
D
GB-5
REPEAT: Repeat function activated
ALARM : Alarm  activated

Publicidad

loading