Descargar Imprimir esta página

Lacor MAGNETIC 69398 Instrucciones De Uso Y Mantenimiento página 31

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 3
4.- Allow a minimum of 12" (30 cm) clearance along the sides.
Allow a clearance of 20" (50 cm) along the front and rear
discharge to endure proper operation and safety.
5.- To prevent any injury or damage do not pull unit by power
cord.
6.- To prevent any injury, discontinue use if power cord is frayed
or worn.
1.- Locate the unit at the proper counter height, in an area that
is convenient for use. The location should be level to
prevent the unit or its contents from accidentally falling, and
strong enough to support the weight of the unit.
2.- Do not place anything on top of the milk frother; doing so
could damage milk frother or subject personnel to possible
injury.
3.- When setting up the unit for operation, make sure power to
the unit is off. Failure to do so could result in personal injury.
4.- To avoid damage to the milk frother or personal injury,
always operate the device with milk inside.
5.- Unit is not weatherproof. For safe and proper operation
locate the unit indoors where the ambient air temperature is
a minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
6.- Do not locate the milk frother in an area subject to excessive
temperature or grease from grills, fryers, etc.
Excessive temperature could cause damage to the unit.
7.- Do not place milk frother in an area that restrict air flow
around the front or rear of the unit.
8.- Some exterior surfaces on the unit will get hot. Use caution
when touching these areas to avoid injury.
9.- Do not fill the milk frother above the MAX mark, as the milk
could overflow when frothed
CAUTIONS
!
31

Publicidad

loading