Publicidad
Idiomas disponibles
Idiomas disponibles
Functions
This device is not just a simple code reader. Unlike cheap OBD-II scanning tools, the
Super Mini Car WiFi vehicle scanner can display all current sensor data. This means that
you can monitor the following:
1. Engine RPM
2. Calculated Load Value
3. Coolant Temperature
4. Fuel System Status
5. Short Term & Long Term Fuel Trim
6. Vehicle speed
7. Intake Manifold Pressure
8. Intake Air Temperature
9. Air Flow Rate
10. Absolute Throttle Position
11. Fuel Pressure
12. Oxygen sensor voltages/associated short term fuel trims Fuel System status and so on.
It eliminates all the guesswork for you, and there is no need to use a separate scanner. Make
your car into a Smart Car at once!
Note: Your vehicle may not support all above parameters. How many
parameters you can get is depended on the vehicle manufacturer's
implementation.
Easy steps to setup:
1. Download the proper App for your device: Torque Pro or DashCommand (for Android), OBD
Car Doctor (for IOS)
2. Connect the Code Scanner to the car OBD interface. The scanner power light will flash and
then standby. (Please turn on your car when connecting, otherwise, the App will not connect
successfully.) Our adapter will release WiFi signal named "WiFi_OBDII".
3. Connect your device to the WIFI network of the scanner named " WiFi_OBDII " to connect.
(For some App like "Torque lite" and "Torque Pro", you will need to open the App on your
device, find Settings=>OBDII setting=>OBD Adapter connect type, choose wifi, because their
default connection is Bluetooth.)
4. Launch the APP and configure it with scanner.
OBD Car Doctor App for iPhone
Publicidad
