ST CS 700 Li 48 Manual De Instrucciones página 178

get familiar with the machine and the
most suitable cutting techniques.
• Handling and correct use of
battery-operated power tools
a) Make sure that the machine is switched
off before inserting the battery. Inserting
a battery in an electric device which is
switched on can cause accidents.
b) Charge battery packs only with
the chargers recommended by the
manufacturer. Battery chargers are
generally specific for each battery type;
use with other types can cause fire risks.
c) Use only batteries specifically designed
for your power tool. The use of other
batteries may cause injuries and fire risks.
d) Keep all unused batteries at a distance
from paper clips, coins, keys, nails,
screws or other small metal objects as
contact with the same can cause short
circuits. Short circuits between battery
contacts can lead to explosion or fires.
e) Batteries in poor condition can cause
liquids to leak. Avoid contact with the
liquid. In the case of accidental contact
flush with water. If the liquid comes into
contact with the eyes, also seek medical
advice. Liquid leaking from the battery
may cause skin irritation or burns.
f) Check that the accumulator is in good
condition and there are no signs of
damage. Do not use the device with
a damaged or worn accumulator.
2.4 BATTERY / BATTERY CHARGER
ATTENTION
The following safety rules complement the
safety rules contained in the battery charger
manual.
• Only use battery chargers recommended by
the manufacturer to recharge batteries. An
inadequate battery charger may cause electric
shock, overheating or corrosive liquid to leak
from the battery.
• Use only batteries specifically designed for
your power tool. The use of other batteries may
cause injuries and fire risks.
• Before inserting the battery, make sure that the
battery backpack selector is to "OFF" position.
Inserting a battery in a machine which is
switched on can cause a fire.
• Keep all unused batteries at a distance from
paper clips, coins, keys, nails, screws or other
small metal objects as contact with the same
can cause short circuits. Short circuits between
battery contacts can lead to explosion or fires.
• Never use the battery charger in environments in
the presence of vapours, flammable substances
or on easily flammable surfaces such as paper,
fabric, etc. The battery charger heats up during
recharging and may cause a fire.
• When transporting batteries, make sure the
contacts never come into contact with each
other and never use metal containers to
transport them.
2.5 PROTECTING THE ENVIRONMENT
Safeguarding the environment must be a relevant
and priority aspect of machine use, of benefit to
the community and the environment we live in.
• Avoid being a disturbance to the
neighbourhood. Use this machine at
reasonable times of the day only (not
early morning or late evening when the
noise could cause disturbance).
• A certain amount of chain lubricating oil
is released into the environment when
the machine is running, so only use
biodegradable oils made specifically for this
use. Use of a mineral oil or motor oil causes
serious damage to the environment.
• Comply with local regulations for the
disposal of packaging, deteriorated parts or
any elements with a strong environmental
impact; this waste must not be disposed of
as normal waste, it must be separated and
taken to specified waste disposal centres
where the material will be recycled.
• Comply with local regulations for
the disposal of waste materials
• When the machine is withdrawn from service,
do not dispose of it in the environment,
but take it to a waste disposal facility in
accordance with the local regulations in force.
Do not throw electrical equipment away
with domestic waste. According to the
European Directive 2012/19/EU on
electrical and electronic equipment
waste and its implementation,
to UK Regulation "The waste electrical and
electronic equipment regulations 2013 (as
amended)" and according to national regulations,
old electrical equipment must be collected
separately, for eco-compatible recycling. If
electrical equipment is disposed of in landfills or
in the ground, hazardous substances can leak
into the groundwater and contaminate the food
chain, damaging your health and well-being. For
further information on the disposal of this
product, contact your dealer or a domestic waste
collection service.
EN - 5
according