Publicidad
GB
!
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF
ALL THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
TBL6055 CONTENTS
● 2 x Ignition Keys
● 1 x 30 Amp Fuse (Brush)
● 1 x 20 Amp Fuse (Vac)
● 1 x 2.5 Amp Fuse ● Maxi Fuse-puller
Lift top tank assembly to reveal battery
compartment, ensuring you use the
handle grip provided.
Fit vacuum and brush fuses (contained
in start-up pack) into the fuse holders as
illustrated.
(Fig. 1, 2, 3.)
Charge the machine to activate the
batteries. After the batteries were
activated, LEDs should illuminate on the
top of all the batteries.
Insert Key into ignition located on the
control panel (See below (Fig. A)
1
Numatic International Ltd recommends ONLY using 911948 NX1K LFP battery type Lithium Batteries provided with this machine.
!
ENSURE THAT NO METAL OBJECTS COME INTO CONTACT WITH BATTERY TERMINALS
Machine Set-up Guide
2
WHILE THE BATTERIES ARE EXPOSED.
Insert the Ignition key and
A
switch the machine on.
(Fig. A)
Using the control handle with both hands, slowly
push the machine off the pallet.
When the machine is removed and in a safe
position, release the control handle.
Note: Do not pull the RED trigger handle while
in transport mode (Fig. B)
During vehicular transportation ensure the
product is secured to avoid unnecessary
movement.
Fuse Location
20Amp
B
15
Use handle grip when
raising or lowering the
top waste-tank.
3
30Amp
!
!
Publicidad
