Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Remove the battery pack from the machine before
maintenance.
11.1
REMOVE A JAMMED STAPLE
1. If there is a jammed staple in the tool, you must remove it
before further use. Attempting to drive a staple while the
tool is jammed could damage the mechanism.
2. Remove the battery pack.
3. Hold the tool upside down. Squeeze the magazine latch
and slide the magazine open.
4. Remove unused staples.
5. Remove the jammed staple with needle-nose pliers.
12
TECHNICAL DATA
Voltage
Staple speed
Staple type
Magazine capacity
Staple crown size
Staple length
Weight (without battery
pack)
Battery model
Charger model
13
LIMITED WARRANTY
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion, will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been purchased or rented for industrial/commercial use, and
that have been maintained in accordance with the instructions
in the owners' manual supplied with the product when new.
WARNING
24 V
60 staples/min
18 GA / T-50
U-Type85 staples / T-Type
85 staples
3/8''
U-Type6-14 mm / T-Type
15mm
2.98 lbs (1.35 kg)
LB24A020/BAG708 and
other BAG series
2978602/2903102 and other
CAG series
3
YEAR
ANS
AÑOS
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA
English
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline
at 1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of the
purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for replacement
under this warranty unless such return is requested in writing
by Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238
Mooresville, NC 28115
10
Canadian address:
Greenworks Tools Canada, Inc.
P.O. Box 93095, Newmarket,
Ontario
L3Y 8K3
Publicidad
