PRIXTON BIKE FIT BF100 Manual Del Usuario página 16

ASSEMBLY INSTRUCTIONS
1. Install the Ball Pin.
Pull the ball pin out to expand the main fram.
2. Install the Front and Rear Stabilizers.
Loose the screws in the stabilizer, and insert them
into the corresponding grooves and tighten in each
stabilizer.
3. Install the Handlebar and Control Panel
Place the handlebar onto the corresponding grooves
in the main frame, tighten it with bolts and gaskets.
Connect the cords with the corresponding slots, and
then place the control panel onto the main frame
and tighten.