SCHUBERTH S3 Manual página 87

G. MAINTENANCE AND CARE
Tip:
Stubborn soiling on the outside of the visor (e.g. dried-on insect residue) is
easy to remove if you cover the closed visor with a damp cloth for a few
minutes to soften the deposits. Repeat this procedure if required.
Note:
Always avoid temperatures above 40 °C and high humidity when choosing
a place to store the visor, as these conditions can cause damage to the
visor.
3. INNER LINING
The inner lining of the S3 can be removed completely. The neck pad, head and
cheek pads can be washed by hand using a mild soap solution (e.g. with highly
diluted standard mild detergent) at a maximum temperature of 30 °C. Allow the
lining to dry at room temperature and with good ventilation.
4. VENTILATION
VENTILATION COWL
When necessary, the head ventilation system's air inlet cowl can be removed to
clean the ventilation mechanism and ventilation grille.
1. Grab slightly into the front opening of
the head ventilation hood.
EN
87