Mellerware Brizy! Circle Manual De Instrucciones página 6

Description
A – Front grille
B – Blades
C – Rear Grill
D – Oscillation knob
E – Speed control
F – Body fixing screw
G – Desk fan base
H – Base fixing screw
I – Inner tube*
J – Tube fixing screw*
K – Stand fan base*
L – Base weight*
(*) Only available in the model
BRIZY! Stand
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
Installation
Be sure to remove all packaging
–
material from inside the appliance.
Ensure that the fan is switched
–
off from the supply mains before
start any installation or assembly
operation.
The plug must be easily accessible
–
so it can be disconnected in an
emergency.
ASSEMBLING THE DESK FAN BASE
(FIG.2)
To fix the base into the appliance,
–
place the appliance face down.
Fit the base with the column and
–
secure it with the screws provided (H).
Stand the appliance up again so
–
as to check that the base works
properly.
ASSEMBLING THE STAND FAN BASE
(FIG.2)
To fix the base into the appliance,
–
place the appliance face down.
Fit the base with the column and
–
secure it with the screws provided (L).
Stand the appliance up again
–
so as to check that the base
works properly.
ASSEMBLING THE FAN BODY WITH
THE COLUMN (FIG.1)
Fit the body with the column and
–
secure it with the screws provided.
Instructions for use
USE
Extend the cable completely
–
before plugging it in.
Connect the appliance to
–
the mains.
Turn the appliance on, by using the
–
speed selection knob (E).
Select the desired speed.
–
OSCILLATION FUNCTION
The oscillation function makes it
–
possible to direct the flow from the
apparatus so that it automatically
alternates over a range of 75°.
To activate this function, turn
–
the knob (D).
EN