MSW -IPD-2000-2W Manual De Instrucciones página 30

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
MSW-IPD-2000-2H
The supplied unit is divided into 3 segments that need to be assembled together -
the base, the column and the cassette.
First, assemble the 4 wheels to the base, where the wheels with a brake should be
at the rear (closer to the column) of the unit.
Then mount the column to the base by placing it on the base and screwing them
together with screws.
Connect the cassettes to the bracket and screw them together. Then connect the
power supply to the cassettes.
3.3.
Working with the unit
IMPORTANT: before the first use, remove the covers from the lamps (for
transportation)!
3.3.1 Control panel
Column
Top cover
Plastic tape
Link
Top cover of the connector
Bracket
Holding handle
Cassette
Plastic caps
Connecting axle
Bottom cover of the connector
Handle
Lower connecting rod
Upper connecting rod
Actuator
Bracket holder
Front wheel
Leg
Base
Back wheel
Residual current circuit breaker
Thyristor module
Handle