Publicidad
Idiomas disponibles
Idiomas disponibles
3.3.2
Setup and use
IMPORTANT: the surface to be heated should be clean and dry.
a) Set the radiant heater in the given place, lock the brakes in the wheels and
adjust the position of the cassette parallel to the surface to be heated, so
that the distance of the lamps from the surface is within 30-60 cm.
b) Connect the unit to a power outlet and press the power button "ON", and
the display on the control panel will show the current voltage value.
1.
Voltage display
2.
Power switch (ON/OFF)
3.
Temperature setting knob
4.
Time setting knob (timer)
Publicidad
