Berner BACAG-1 BL 18V 01 Manual Original página 24

TECHNICAL DATA
Type
Production code
Battery voltage
Rated speed
Thread of work spindle
D=Grinding disc diameter max.
d=Grinding disc hole diameter
b=Grinding disc thickness max.
b=Cutting disc thickness max. / min.
D=Sanding disc diameter max.
D=Wiring brush diameter max.
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah ... 12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors!
Vibration information: Vibration total values (triaxial vector sum) determined
according to EN 60745.
Vibration emission value a / Uncertainty K
h
Surface grinding
Disc sanding
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may signifi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding, Wire Brus-
hing or Abrasive Cutting-Off Operations:
a) This power tool is intended to function as a grinder, sander,
wire brush or cut-off tool. Read all safety warnings, instruc-
tions, illustrations and specifi cations provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
ENGLISH
457 728 - Berner-BACAG-1 BL 18V.indd 24 457 728 - Berner-BACAG-1 BL 18V.indd 24
BBC 14.4-18V, BBC-2 14,4-18V, BBCF 14,4V-18V
b) Operations such as polishing are not recommended to be
performed with this power tool. Operations for which the power
tool was not designed may create a hazard and cause personal
injury.
c) Do not use accessories which are not specifi cally designed
and recommended by the tool manufacturer. Just because the
accessory can be attached to your power tool, it does not assure
safe operation.
d) The rated speed of the accessory must be at least equal to
the maximum speed marked on the power tool. Accessories
running faster than their rated speed can break and fl y apart.
e) The outside diameter and the thickness of your accessory
must be within the capacity rating of your power tool. Incorrectly
sized accessories cannot be adequately guarded or controlled.
f) Threaded mounting of accessories must match the grinder
spindle thread. For accessories mounted by fl anges, the arbour
hole of the accessory must fi t the locating diameter of the
24
BACAG-1 BL18V
Cordless Angle Grinder
BACAG-1 BL 18V 01
XXXXXX MJJJJ
18 V
8500 min
-1
M14
125 mm
22,2 mm
6 mm
3 mm / 1 mm
125 mm
75 mm
2,4 ... 3,5 kg
-18 ... +50 °C
BBP18V-X, BBPP18V-X
82,6 dB (A) / 3 dB (A)
93,6 dB (A) / 3 dB (A)
5,85 m/s 2 / 1,5 m/s 2
1,81 m/s / 1,5 m/s
2 2
22.05.2021 13:38:53 22.05.2021 13:38:53