Publicidad
Idiomas disponibles
Idiomas disponibles
Plug the device into the mains.
•
Place the selected treatment head.
•
Switch on the device by pressing the
•
power button ❷.
If desired, switch on the SLIMtech®
•
technology by pressing the button ❺.
Hold the device firmly, preventing it
•
from turning around on itself, as this
could end up damaging the cable.
Select the speed (from 200 rpm to
•
800 rpm) using the regulator ❸. Start
with a gentle speed, and increase ac-
cording to the sensitivity to massage.
Pass it slowly in circular movements,
•
avoiding pressing it against the skin
with excessive pressure.
To drain, use the Cellu-Detox head
•
❽, slide it with upward movements
from the ankle to the groin, avoiding
touching the bones.
To change the head, always turn off
•
the device by pressing the power
button ❷.
7
Inserting and removing the head
a.
To position the head, insert the
selected head shaft on the shaft at
the base of the device, and secure
it by pressing the central button of
the head ⓫. Pressing or forcing the
anchoring system is needless.
b.
To remove the head, press the central
button ⓫. Once released, pull it
outwards.
8
Publicidad
