Mark MIRROR BALL 8 Instrucciones De Usuario página 4

EN
1
2 2
3 3
4 4
5 5
6 6
INSTALLATION
Please consider the EN60598-2-17 and the respective national norms during the
installation! The installation must only be carried out by an authorized dealer!
The installation of the mirror ball has to be built and c onstructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondar y safety attachment. This secondary safety attach-
ment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating
skilled person once a year.
OVERVIEW
7 7
8 8
9 9
DANGER TOLIFE!
and machine-technical installations are approved by a
MIRROR BALL (8"/12"/16"/20")
2
(1) Mirrorball motor
MTL 205/208 depending on
MIRROR BALL model (Sold separatly)
(2) Motor axle
(3) Screw-on chain link
(4) Mirrorball chain
(5) Installation eyelet
(6) Mirrorball
(7) Attachment eyelet
(8) Safety chain
(9) Attachment eyelet
User Manual / Manual de uso