Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Max. Capacity: 1500 kgs
Min. Height: 90 mm
Stroke: 268 mm
Length: 554 mm
DESCRIPTION
This jack is designed for lifting a part of the total vehicle. The jack have a bypass system for safe
operation and overload valve, which prevent equipment failure.
WARNING:
Before using this appliance, read this Operator's Manual and follow all its Safety Rules and Operating
Instructions.
SAFETY INSTRUCTIONS
Read Operating Instructions
Study, understand and follow all instructions in this manual before operating the jack. Failure to heed
these warnings may result in loss of load, damage to the jack and/or jack failure resulting in personal
injury or property damage.
Position the Jack
Position the jack only to lift on the areas of the vehicle specified by the vehicle manufacturer.
Use Support Stands
After lifting the vehicle always support the load with appropriately rated vehicle supports stands before
working on the vehicle.
Do Not Overload Jack
Do not overload this jack beyond its rated capacity.
Overloading this jack beyond its rated capacity can cause damage to or failure of the jack.
Use on Hard Level Surface
This jack is designed only for use on hard level surfaces capable of sustaining the load. Use on other
than hard level surfaces can result in jack instability and possible loss of load.
Center Load on Jack Saddle
Center load on jack saddle before lifting vehicle. Off-center loads and loads lifted when the jack is not
level can cause loss of load or damage to the jack.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Trolley Jack, 1.5 to.
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 2897
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
