Publicidad
Idiomas disponibles
Idiomas disponibles
During the warranty period, Master Products machines may only be dismantled and repaired by the manufacturer's
engineers or official representatives.
The operator using the machine must check that processed materials are regularly removed. Anything left behind
could become an obstruction and therefore cause the machine to malfunction.
MASTER PRODUCTS is characterised by the constant improvement of all its products. As a result, there may be some
differences between machine versions. If the operating characteristics or appearance of the purchased product differ
from this manual, it is necessary to contact technical support for assistance.
This manual, as well as any documentation supplied by the manufacturer, should be considered as the information
package associated with this equipment. Any user must read and understand this manual. If the operating characte-
ristics or appearance of the purchased product differ from this manual, it is necessary to contact MASTER PRODUCTS
technical support for assistance.
7. Transport
Pallet 138 x 81 x 142 cm = 303 Kg // Net weight MT Tumbler 800 & 800 MED = 220 Kg
8. Electrical connection
230 V / 50-60 Hz single-phase.
9. Placement
The Tumbler 800 & 800 MED machines must be placed on a flat surface without irregularities, ensuring its stability
and a good working position for the user. It is only suitable for indoor use. Do not use the equipment in dangerous
environments or in damp or wet locations. Never expose the control panel directly to rain or water. Keep the working
area well-lit and free of obstacles. Disorder leads to accidents.
Always use the equipment in a well-ventilated area. Any dust generated can be a health hazard. Use a dust extraction
system whenever possible and if not possible, it is recommended to use a face mask or dust mask.
10. Operation
The MT Tumbler 800 & 800 MED enable large scale trimming of fresh and dried flowers. When set up correctly and
operated within design specifications, these machines offer unrivalled performance and an end product that is almost
indistinguishable from hand trimming, while retaining the beauty and quality of the processed flowers.
Depending on the nature of the product to be processed, in this case wet or dry, as well as the room temperature and
other factors, it may be necessary to change the barrel.
Consult with the MASTER PRODUCTS sales department if you plan to process dry product because the machines are
sold as standard only with a wet barrel, and to process dry flowers it is necessary to use a specific barrel.
28
www.masterproducts.es
Publicidad
