SYSTEL SOLAIR 5000 Instrucciones De Uso página 19

6.4 - Attachment
Fix the SOLAIR heating system
levelled.
6.4.1 - Chain fastening
G
See page 4.
Legend
1 SOLAIR heating system
2 Fixing loop
3 Chain (not supplied)
4 Fixing ring (not supplied)
5 Dowel (not supplied)
● Choose the type of fixing suitable for your
support (stone, concrete...) and with the
load to be supported (see chapter "Technical
data").
● Drill the holes.
● Insert dowels into the holes
● Screw the fixing rings (4) into the dowels (5).
● Pass the chain (3) in the fixing loop (2).
● Fix the chain (3) on the fixing rings (4).
6.4.2 - Fastening with SARGAZ system
H
See page 4.
Legend
1 SOLAIR heating system
2 SARGAZ system
3 Fixing loop
4 Fixing hook (not supplied)
For more information on the SARGAZ
system contact your dealer.
● Place the fixing hook (4) on the gas hoses.
● Pass the fixing handle (3) into the hook (4).
07/2018
7 - Gas connection
Use only suitable gaskets (gaskets are
not supplied).
Refer to chapter "Appliance
description" to locate and identify the
different connections.
● When assembling the connections, correctly
position the seals to avoid any leakage of
gas.
7.1 - By flexible hose
I
See page 4.
Legend
1 SOLAIR heating system
2 Gas connector 1/2
● Close the gas tap.
● Connect the gas supply hose to the gas
connector 1/2 (2) without forgetting the
gasket.
The hose, over its entire length, must
under no circumstances:
- Be in contact with a hot part of the
heater.
- Be in contact with the flames of the
heater.
Flexible hoses shall be arranged in such a way
as to avoid any tensile stress.
They must be observable along the entire length.
In addition, their inclination must be such poultry
cannot land there.
7.2 - By SARGAZ system
J
See page 4.
Legend
1 SOLAIR heating system
2 SARGAZ system
3 Gas connector 1/2
● Close the gas tap.
● Connect the SARGAZ system (2) on the
gas connector 1/2 (3) without forgetting the
gasket.
19
EN
Solair_00