rivacase VA2240 Manual Del Usuario página 2

Thank you for purchasing the RIVACASE portable battery.
Read all instructions and warnings carefully before
using the RIVACASE portable battery.
Product package:
• RIVACASE portable battery
• User manual
• Micro USB cable
Specifications:
Model: VA2240
Battery: Li- Polymer 3.7 V
10000 mAh 37 Wh
Input: Micro USB DC 5 V 2 A
Type-C DC 5 V 2 A
Output: USB1 5 V 2 A
USB2 5 V 2 A
Fully charged RIVACASE VA2240 is enough to charge most
smartphones up to 2.5 times or to charge most Tablets
up to 1 time (depending on the device battery capacity).
Safety protection
Over charge | Over discharge | Short circuit protection
Over current | Over Voltage
Operating instructions
Charge the external battery fully before the first use. Connect the cable to the Micro USB / Type-C
input port of the external battery. Connect the other end of the cable to the power source. You can
use PC, AC charger or car charger to charge the battery. We recommend using RIVACASE charger
with at least 12 W (2.4 A) output. Average full charging time is 5-6 hours. Display shows battery
level. Press button to check battery level. Display blinks during recharging. Disconnect the cable
after charging the portable battery.
To charge the electronic device, plug the cable into portable battery output ports, then connect
the other side of the cable to the electronic device. The charging will start
automatically. When charging is completed, unplug the cable from portable battery and the
mobile device.
Smart output
RIVACASE VA2240 identifies connected device and delivers its fastest possible charge.
We do not recommend keeping RIVACASE battery discharged, as it might be damaged. Press the
button to check the battery charge level.
Output SMART USB 1
Type-C Input
Output SMART USB 2
Micro USB Input
Digital display
EN