Steinbach Speedcleaner APPcontrol Manual De Instrucciones página 11

Before the cleaner clears the surface of the water, it must be held there
for 10 to 15 seconds, so that most of the water can fl ow out of the water
outlet into the pool. Only then should you put the cleaner on the edge of
the swimming pool.
Clean the fi lter tray Fig. 11
■ Lift the tray handle up
■ Take out the fi lter tray
■ Slide the clip to open the tray
■ Take the slides off
■ Clean the tray
Put the fi lter tray back Fig.12
Machine have a slide way to lead fi lter tray back into the cleaner, and
clip the handle in position perfectly.
Hints and tips
Every time the cleaner is taken out of the water, the fi lter cleaner must
be cleaned.
Make sure the pH value of the water is between 7.0 and 7.2.
Make sure the water temperature is between 10°C and 32°C.
After every clean, the drive train must be thoroughly cleaned to ensure
the same level of grip on the next clean.
After pressing the "Power Off" button, the "Power On" button cannot be
pressed for 30 seconds.
We recommend keeping the cleaner between 10°C and 32°C in a shad-
ed, well ventilated place. Avoid direct sunlight at all times.
We recommend attaching the operating unit with a safety rope, to avoid
any risk of the power pack being pulled into the pool.
Before use, please read the instructions relating to trouble-shooting
thoroughly.
Trouble shooting
Indicator Meaning
1H fl ash quickly Machine out of
with buzz water
All lights fl ash Power supply
quickly with buzz over load
1H+2H+3H fl ash Seal box
quick with buzz leaking
ALL+1H fl ash Pump over load
quick with buzz
WALL+2H quick Walking motor 1
with buzz over load
FLOOR+3H fl ash Walking moter 2
quick with buzz over load
ALL+WALL Cleaner present
+1H+2H fl ash abnormalvolt-
quick with buzz age
ALL+WALL Abnormal com-
+FLOOR fl ash munication
quick with buzz
WALL+FLOOR Machine out of
+2H+3H fl ash water and could
quick with buzz not restart
WALL fl ash quick Machine turned
with buzz over
Technical data
■ Input voltage: 220(230) VAC
■ Frequency: 50 Hz
■ Output voltage: DC (direct current) 24 V
■ Rated power: 200 W
■ Cable length: 18 m
■ Width of cleaning drum: 465 mm
■ max. Cleaning area in swimming pool: 270 mÇ
■ Filter performance: 20mÑ/h
■ Filter grade 180 μm
■ Operating temperature (water): 10°C - 32°C
■ Crawl speed: 12m/min
■ Hydrolytic resistance class: Cleaner: IPX8; Power supply: IPX5
■ Surrounding temperature: 10°C - 32°C
■ Weight of the cleaner: 12.5 kg (without cable)
Service
Please do not send the equipment to us without authorisation, but
please contact our service centre initially! If the equipment has to be
collected, it must be packed securely and the invoice (copy) must the
enclosed. As soon as the unit reaches us, it will be checked for faults by
our claims department, and repaired. On conclusion of this work, your
equipment will be returned to you as quickly as possible. If this return
is not covered by the guarantee, the costs incurred will be calculat-
ed. Guarantee processing / guarantees are handled by the company
Steinbach VertriebsgmbH. The item will be repaired by the company
Steinbach VertriebsgmbH, however where no right of return exists it will
not be taken back.
Cleaning
Suggestion Use conventional cleaning products. Do not use solvent-based or abra-
sive cleaning agents/tools, i.e. no hard sponges, brushes etc.
Put machine back into
water or wait until ma-
Storage
chine restart automat-
ically
The product must be thoroughly dried after cleaning. After which, it is to
Stop machine contact
be stored in a dry location protected from frost.
after sale service person
Disposal
Stop machine contact
after sale service person
Disposing of packaging: The packaging material has been selected
Stop machine check the
in view of environmental concerns and disposability and is therefore
impeller and pump
recyclable. The paper and cardboard can be recycled, as can the plastic
coverings.
Stop machine check belt
Disposing of the product: Applicable in the European Union and other
and transmission system
European states with systems in place for collecting and sorting recycla-
Stop machine check belt
ble materials. Dispose of the product in accordance with any laws and
and transmission system
regulations applicable at your place of residence.
Stop machine contact
after sale service person
Warranty conditions
The respective country's legal provisions for warranty conditions shall
Check the cable between
apply accordingly. For Austria and Germany, these apply for 2 years
cleaner and power sup-
after the date of invoice.
ply or contact the after
A guarantee will only be undertaken by the manufacturer with regard to
sale service person
safety and reliability under the following circumstances:
Stop machine restart
■ The fl oor vacuum cleaner is used in accordance with the guidance in
machine manually after
the instruction manual.
cleaner sink ■ Only original replacement parts were used in any repairs (Parts liable
to wear and tear are not covered by guarantee).
Turn over machine
manually
Important Note
061023_v1901 EN
11