Publicidad
Idiomas disponibles
Idiomas disponibles
4.5.5 Connecting the 3G/4G Dongle
To connect the cellular modem inside the Cassia X2000, follow the steps below:
(a) Remove the screw cap
(c) Plug the USB
cellular modem into the
To connect the modem outside the gateway, follow the extra steps below:
(a) Use a screwdriver to remove the USB hole
cap (M20x1.5. Please do not confuse it with the
ETH/PoE plug)
NOTE!
The 3G/4G dongle is optional, that is, it is not necessary for the Cassia X2000 gateway to operate.
This step is only necessary if the user chooses to connect the gateway to the internet via a 3G/4G
network.
USB port
(b) Use a Phillips
screwdriver to open
the top
(d) Install the top cover,
tighten the screws and
insert the screw cap
(b) Pass the USB plug through the hole in the cap,
install the silicone plug, connect the USB cable, install
the cap, and then connect the cellular modem
Installation
Gateway Cassia X2000 | 21
Publicidad
