Technical Specifications - Lenco DVP-9463BK Manual Del Usuario

Technical Specifications

Item Sub Item
Input Frequency
Tuner RF Input level
IF Bandwidth
Modulation
Decoder Format
Video
Output Format
Output Port
Troubleshooting
Problem
No picture
Screen shows "No
Signal"
No sound from
speaker
Only sound, no image
on the screen
Remote Control is not
responding
The image stopped
suddenly or mosaic
- The DVP-9463BK can only receive non encrypted free TV channels.
Parameter
170~230MHz
470~860MHz
-79dBm(T), -75dBm(T2)
7MHz and 8MHz
QPSK, 16QAM, 64QAM, 128QAM(T2), 256QAM(T2)
MPEG4 AVC/H.264 HP@L4
HEVC/H.265 HT@L4
MPEG2 MP@ML.HL
480i, 480p,576i, 576P, 720P, 1080i, 1080P, 4:3 and 16:9
HDMI
Potential Reasons
Power isn't connected
The power switch is not on
DVB-T cable not connected
Incorrect setting
Sound on mute
Incorrect sound track
No or incorrect connection with AV
cable
The program is a radio program
The battery is exhausted
Remote Control is not facing or
close enough to the Set Top Box
The signal is too weak
What to do
Connect the power
Switch on the power
Plug in the DVB-T cable
Reset setting
Turn off mute function
Try another sound track
Make sure cables are connected correctly
Press <TV/RADIO> key to shift into TV mode
Change battery
Adjust the position of the Remote Control and
move closer to the unit
Strengthen the signal
20