Skil LL9322G-00 Manual Del Propietário página 15

MAINTENANCE
This tool has been designed to be a low-maintenance tool. However, in order to maintain its
performance, you must always follow these simple directions:
Avoid exposing the tool to shock, continuous vibration or extreme hot or cold temperatures.
•
Always store the tool indoors.
•
Always keep the tool free of dust and liquids. Use only a clean, soft cloth for cleaning. Avoid
•
using any solvents.
Do not disassemble the tool; this will expose the user to hazardous radiation exposure.
•
Do not attempt to change any part of the laser lens.
•
Do not dispose of this product in fire; batteries inside the product may explode or leak.
•
After you have finished using the tool, always make sure that the switch is in the lock icon
•
position.
TROUBLE SHOOTING
Problem
The laser line is not
projected.
The laser line is hard to see. The tool is too far from the
The laser line flickers for
alert.
The battery charge is too
low.
target.
The surface where the
tool has been placed is
uneven or the tool is out of
its automatic Self-Leveling
range.
For Recycling
To preserve natural resources, please recycle or dispose of batteries
properly. This product contains lithium-ion batteries. Local, state, or
federal laws may prohibit disposal of lithium-ion batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/ or disposal options.
Cause Remedy
Charge the battery.
Move the tool closer to the
target.
1. Place the tool on a more level
surface (within ±4°).
2. Set the tool to its manual
leveling mode.
15