Fenton RP173 Manual De Instrucciones página 4

OVERVIEW
1. Function Knob
Knob to select FM- phono- or BT-mode.
2. BT LED
3. Power/volume Knob
Turn the knob to turn on/off- and set the volume of the turntable.
4. Dial Knob
5. Platter
Place your record here.
6. Lift Lever
Operate to lower or raise the tone-arm.
7. Tone Arm Clip
This specially designed arm clip secures the tone arm while at rest or
when not in use. The arm clip has been designed to remain in the up
position while unlocked.
8. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is enabled, the
platform will start rotating as soon as the tone arm is placed over the record
and will stop rotating when it has reached the end of the record. Some vinyl
records stop before the end or do not stop when the end is reached. In this
case set Auto-stop to OFF.
9. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
10. Spindle
11. Tone arm
12. Cartridge with Needle
When the turntable is not in use, it is recommendable to place the removable
protection cover over the stylus.
13. FM Antenna
14. RCA Line output
The sound signal from long-playing record is sent to this line output. Connect
this signal to the line input of an such as an amplifier or a line input of a
CD/DVD player.
15. USB Port
Use a USB cable to connect your turntable to your computer. The USB
connection will send audio from the turntable to your computer.
16. DC IN port
Connecting the 12Volt/DC power adapter.
TURNTABLE OPERATION
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Turn the power & volume control knob clockwise to turn on the record player.
3. Remove the protective needle cover.
4. Select phono mode by turning the function knob to PH.
5. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to the record.
When playing a 45RPM record, use the provided 45RPM adapter.
6. Open the tone arm clip to release the tone arm. Push the lift lever backwards to raise the tone arm and gently move the
tone arm to the desired position over the record. The turntable will begin to spin when the tonearm is moved toward the
record(when the AUTO STOP switch is ON). Push the lift lever forwards to lower the tone arm slowly onto the desired
position on the record to start playback.
7. Turn the volume control knob to adjust the volume.
Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when finished.
RADIO OPERATION
1. Select radio mode by turning the function knob to FM.
2. Turn the radio dial knob to tune in to the station you want to listen to (88-108MHz).
3. Turn the volume control knob to adjust the volume.
NOTE: The receiver has a build-in FM pigtail antenna on the back of the unit. This should be unraveled for best reception.
4